Table 1 presents a summary of drilling results obtained from this program.
Table 1. Summary of Highlight Assay Results from RAB Drilling completed in 2018
|Length (m)||Au (g/t)|
|TMRB-18-04||673479||5152959||27.43||50||-55||No Significant Values|
|TMRB-18-05||673557||5152836||44.2||0||-90||No Significant Values|
|TMRB-18-06||673445||5152950||33.53||0||-90||No Significant Values|
*Note: length represents downhole interval. Insufficient information exists to estimate true thickness
The Highland Gold property covers an extensive cluster of high-grade gold occurrences in an area that has seen very limited exploration. The property is located approximately 60 kilometres northwest of the city of Sydney, Nova Scotia in the Cape Breton Highlands. It consists of staked mining licenses on crown land that covers approximately 5,408 hectares. The property can be easily reached by a major road (Highland Road) and a network of logging roads.
Work completed by Transition has highlighted large scale structures, strong alteration and widespread bedrock mineralization that are consistent with aspects of an epithermal gold system. In particular, the high resolution airborne magnetic survey highlighted a large (4 kilometre long) region of low magnetic susceptibility developed around one of the major structures on the property associated with widespread propylitic alteration. Figure 1 depicts the project location, known zones of mineralization and recently completed holes.
Rocks of similar age and formation are known to host significant gold deposits in the Carolinas, Newfoundland and the British Isles. The regional geologic framework in Cape Breton is interpreted by Transition to be similar to that hosting First Mining Gold’s Hope Brook deposit in Newfoundland (844,000 ounces of gold grading 4.77 g/t gold in the Indicated Resource category and 110,000 ounces grading 4.11 g/t gold in the Inferred Resource category*) and Oceana Gold’s Haile Mine in South Carolina (3.32 million ounces grading 1.77 g/t gold in the Measured and Indicated Resource category and 0.6 million ounces grading 1.4 g/t gold in the Inferred Resource category**).
*Source: First Mining Gold Website – https://firstmininggold.com/projects/newfoundland/hope-brook-project/
**Source: Oceana Gold Media Release dated March 29, 2018
Previous Work at Main Zone
The Main Zone was discovered by Scominex, a joint venture between INCO, Husky Oil and the Nova Scotia government in 1987 as part of a greenfield exploration program to locate the source of gold in stream sediment anomalies detected along a 40 kilometre section of the Cape Breton highlands. This work led to the discovery of more than 30 mineralized bedrock occurrences within an approximate 50 square kilometre area. Despite favourable assay results from surface trenches, Scominex was unable to effectively sample near surface mineralization using diamond drilling, as the friable nature of the oxidized mineralized zones and bedrock contributed to extremely poor core recoveries. The best drill intersection from the 8 hole 612 metre Scominex program was 1.25 g/t over 0.84 metres at the Main Zone.¹
A second attempt to drill the Main Zone was undertaken by Lodestone Resources in 1995 who was only able to recover sufficient amounts of mineralized core to assay from 5 of the 17 holes (383 metres drilled) to submit for assay. The best interval was 4.0 metres grading 1.53 g/t gold however visible gold was panned from drill cuttings of several of the holes. These results were inconsistent with surface sampling including results from a 1,000 kilogram composite sample collected by Lodestone from 10 bedrock sites along a 70 metre exposed section of the Main Zone, reported to average 21 g/t Gold.²
Transition interprets that the Main Zone is associated with a major northwest trending, southwest dipping structure that can be traced using airborne magnetic and conductivity lineaments for 2.5 kilometres. A large area of strong alteration and mineralization is associated with this portion of the structure. Only cursory historical diamond drilling along a 300 metre section of this structure has been attempted. RAB Drilling and trenching at the Main Zone now outlines a mineralized zone that can been traced along strike at surface for approximately 100 metres down dip to a maximum distance of approximately 50 metres that remains open for expansion to depth and along strike. Main Zone is one of 30 mineralized zones identified on the property.
¹ Source: Novascan report AR-ME-1987-204, Report of Exploration on the Cape Breton Highlands Project, Scominex, 1987.
² Source: Novascan report AR-ME-1995-008, Work Report for the McMillan Flowage Gold Project, Lodestone Ltd., 1995.
Vancouver Resource Investment Conference
Transition Metals cordially invites you to visit with Company representatives at Booth #836 at the Vancouver Resource Investment Conference (VRIC) to be held at the Vancouver Convention Centre West (1055 Canada Place, Vancouver) on Sunday, January 20th – Monday, January 21st, 2019.
QAQC and Sample Preparation
RAB drilling produces a mixture of crushed rock powder and chips flushed using compressed air and collected at the casing. Each five foot run produces approximately 20 kg of sample material which is homogenized and split on site such that approximately 20% of the sample is submitted for assay. All core samples were half sawn at a controlled location by Company representatives and transported in zip tied sacs by the company to the lab. Transition Metals employs in-house QA/QC procedures that conform to industry best practices including the insertion of field and lab blanks and duplicates. All analytical work performed on samples was conducted by SGS Laboratories in Lakefield, Ontario. Samples were dried, weighed then crushed to 75% passing less than 2 mm, with a 1,000 g split pulverized to 85% passing 75µm screen. A 50 g aliquot was analyzed by fire assay methods with samples returning greater than 10 g/t gold being re-analyzed by fire assay with a gravimetric finish. The quality system used by SGS complies with the requirements of ISO 17025:2005.
The technical elements of this press release have been approved by Mr. Greg Collins, P.Geo. (APGO, APGNS), a Qualified Person under National Instrument 43-101. Historical assay results cited above have not been verified by the Qualified Person.
Transition Metals Corp
Transition Metals Corp (XTM -TSX.V) is a Canadian-based, multi-commodity project generator that specializes in converting new exploration ideas into discoveries. The award-winning team of geoscientists has extensive exploration experience which actively develops and tests new ideas for discovering mineralization in places that others have not looked, often allowing the company to acquire properties inexpensively. Joint venture partners earn an interest in the projects by funding a portion of higher-risk drilling and exploration, allowing Transition to conserve capital and minimize shareholder’s equity dilution.
Cautionary Note on Forward-Looking Information
Except for statements of historical fact contained herein, the information in this news release constitutes “forward-looking information” within the meaning of Canadian securities law. Such forward-looking information may be identified by words such as “plans”, “proposes”, “estimates”, “intends”, “expects”, “believes”, “may”, “will” and include without limitation, statements regarding estimated capital and operating costs, expected production timeline, benefits of updated development plans, foreign exchange assumptions and regulatory approvals. There can be no assurance that such statements will prove to be accurate; actual results and future events could differ materially from such statements. Factors that could cause actual results to differ materially include, among others, metal prices, competition, risks inherent in the mining industry, and regulatory risks. Most of these factors are outside the control of the Company. Investors are cautioned not to put undue reliance on forward-looking information. Except as otherwise required by applicable securities statutes or regulation, the Company expressly disclaims any intent or obligation to update publicly forward-looking information, whether as a result of new information, future events or otherwise.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Further information is available at www.transitionmetalscorp.com or by contacting:
President and CEO
Transition Metals Corp.
Tel: (705) 669-1777
Figure 1. Highland Project Location and Highlights
To view an enhanced version of this Figure 1, please visit: